How To Fix Intel Undi Pxe-2.1 Build 082
You might need to load your BIOS and make sure the hd is set up as the first boot device. Larn how to exercise that:
https://www.groovypost.com/howto/bios-uefi-setu...
Best,
Andre
twitter/adacosta
groovypost.com
26 people establish this respond helpful
·
Was this respond helpful?
Cheers for your response Andre.
I did effort this approach but since I don't accept a hard disk (HDD) so I don't think this will work, I tin can't see a hard drive option in the BIOS, it just says "not detected" under the particular "hard drive". I accept a solid state drive (SSD) which is not an add on, it's the manufactory version that I purchased with the original computer. The kicking priority is "Legacy Start" I believe. Whatever suggestions would be most welcome.
Thanks.
12 people institute this reply helpful
·
Was this reply helpful?
do you have a 2nd laptop that works?
and USB Drive?
44 people found this answer helpful
·
Was this respond helpful?
Aye, I do accept a second laptop and a USB drive.
8 people establish this answer helpful
·
Was this answer helpful?
ok practise these steps and see if it works
i. become to a working laptop and insert your USB drive
2.copy and paste this link to a new tab using ctrl+c to copy and ctrl+p to paste and download the tool https://www.microsoft.com/en-u.s./software-download/ windows10 wait for it to download when its washed run information technology.
3. wait for the setup to start then accept the terms.
iv. when its done loading it bear witness two options cull create installation media then click next.
five. it will have some options and a checkmark saying use the recommended options for this PC if you don't want to use the recommended options for your PC uncheck the checkmark and cull the ones you desire then click adjacent
half-dozen. choose the media you want to use then click next. note: you need to take have to the lowest degree 8GB free on a USB
vii. information technology will show a listing of USB Drives that is inserted on the PC if in that location is i click side by side.
8.now you take to wait for the setup to download windows 10 setup for the USB drive.
when its washed downloading
______________________________
ane.insert the USB drive you used and insert information technology to your PC your having problems with. Note: make certain the PC is off when you insert the USB.
2. follow the steps and brand certain to tell me what happens besides make sure windows is activated.
19 people found this reply helpful
·
Was this answer helpful?
Hi JakeND,
In that location are multiple download options at the link that you lot provided.
Do yous hateful the "Create Windows ten Installation media" choice?
Also, does the USB that I use need to be empty, i.e. have no other content on it?
Thanks.
3 people constitute this reply helpful
·
Was this reply helpful?
Hi JakeND,
There are multiple download options at the link that you provided.
Do yous hateful the "Create Windows x Installation media" option?
Also, does the USB that I apply need to be empty, i.e. have no other content on it?
Thank you.
yep only the USB can have things on it merely have 8GB storage free on it
eight people found this reply helpful
·
Was this reply helpful?
PXE boot means its trying to get boot information from the network adapter - it is non trying to boot from any hdd/ssd.
Its a bios Setup setting.
It too might exist your SSD is non plugged in, or defective and its reverting to PXE boot.
~
viii people establish this reply helpful
·
Was this reply helpful?
Hello JakeND,
I followed your recommended steps, the USB does need to exist blank as any data on information technology will exist deleted. I now have two options when I start the broken PC with the USB plugged in, these are as follows:
"Which type of installation do yous want?
one. Upgrade: Install Windows and keep files, settings and applications
The files, settings and applications are moved to Windows with this option. This option is only bachelor when a supported version of Windows is already running on the computer.
2. Custom: Install Windows just (avant-garde)
The files, settings and applications aren't moved to Windows with this choice. If you desire to make changes to partitions and drives, kickoff the computer using the installation disc. We recommend backing up your files before you continue."
I tried selection i but it does not piece of work, I receive the following message subsequently trying selection 1:
"The upgrade option isn't available if you start your computer using Windows installation media."
I am reluctant to try option 2 every bit I don't want to lose whatever files. I don't understand your previous advice "make sure windows is active". I'yard non sure how I can do this if the calculator will non commencement?
Any further advice volition be much appreciated.
Thank you.
three people found this reply helpful
·
Was this reply helpful?
Cheers MikeD.
The SSD is congenital in, it is not an add on or plug in device.
The post-obit are the Boot settings which are currently shown in the BIOS:
Kick Mode [Legacy Back up]
Boot Priority [Legacy First]
USB Boot [Enabled]
PXE Kick to LAN [Enabled]
EFI
Legacy
Network Boot: Realtek PXE B08 D00
SATA ODD : PLDS DVD-RW DA8A5SH
Whatever communication on the settings or on how to determine if the built in SSD is lacking would be much appreciated.
Thank you.
9 people found this reply helpful
·
Was this reply helpful?
How To Fix Intel Undi Pxe-2.1 Build 082,
Source: https://answers.microsoft.com/en-us/windows/forum/all/start-up-error-intel-undi-pxe-21-build-083/e2217e53-a324-49e6-a217-2c53dab1a9b2
Posted by: joynerandutimmose.blogspot.com
0 Response to "How To Fix Intel Undi Pxe-2.1 Build 082"
Post a Comment